IMX6UL 烧录问题

小智MM

我这里把上面提到的两个文档share给你，你也可以到我们的官网上去下载。 i.MX_Yocto_Project_User's_Guide.pdf (306.95 KB, 下载次数: 4)

2020-10-23 11:36 上传

点击文件名下载附件



i.MX_BSP_Porting_Guide.pdf (731 KB, 下载次数: 4)

2020-10-23 11:36 上传

点击文件名下载附件

lulabc

小智MM 发表于 2020-10-23 11:36
关于你如上问题回复如下：
1、关于DDR 的修改，你可以看一下这里的配置，
https://community.nxp.com/t5/ ...

实在太感谢小智MM了， 不过我这里BOOTCFG[1：0]无论01 10 还是00都能识别到   这是不是说明USB设备和CPU的联系没建立起来呢   另外还想请教一下关于地址的问题   在mfgtool下的文件中  ucl2.xml脚本文件中 的”0x80800000“ “0x83000000”具体是哪些内存的地址呢  芯片内部的内存？ DRAM？ 我看了下相关手册也没找到具体的介绍。

lulabc

经过硬件调整后  现在遇到的问题是OTG工具显示 “Jumping to OS image” 后  就显示 No Device  Connect    救命呀

lulabc

MFGTOOL .log文件


DLL version: 2.7.0
Tuesday, October 27, 2020 09:50:09   Start new logging
ModuleID[2] LevelID[10]: CMyExceptionHandler thread is running
ModuleID[2] LevelID[1]: new MxHidDeviceClass
ModuleID[2] LevelID[10]: new MxHidDevice[0124F7C0]
ModuleID[2] LevelID[1]: new MxHidDeviceClass
ModuleID[2] LevelID[10]: new MxHidDevice[0124FFF8]
ModuleID[2] LevelID[10]: Device Manager thread is running
ModuleID[2] LevelID[1]: Can't set m_hStopEvent before it initialized or it already stop

ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 0
ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is D:\8.14\OKMX6UL-C2-linux3.15\5ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is D:\8.14\OKMX6UL-C2-linux3.15\5ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is D:\8.14\OKMX6UL-C2-linux3.15\5ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is D:\8.14\OKMX6UL-C2-linux3.15\5ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Jump[WndIndex:0]
ModuleID[2] LevelID[10]: *********MxHidDevice[0124FFF8] Jump to Ramkernel successfully!**********
ModuleID[2] LevelID[10]: CmdOperation[0], current state command has been finished and the last command is successful, so SetEvent(hDevCanDeleteEvent)
ModuleID[2] LevelID[10]: DeviceManager:evChangeWnd::OnDeviceChange() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&ID_0080#5&279c7486&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceManager:evChangeWnd::OnDeviceChange() - end
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&ID_0080#5&279c7486&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 1
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, devInstPathToFind: USB\VID_15A2&ID_0080\5&279C7486&0&8, _deviceInstanceID: USB\VID_15A2&ID_0080\5&279C7486&0&8
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, Find the device
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT,[MxHidDeviceClass] vid_15a2&pid_0080, Hub:1-Port:8
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT, Notify
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume/Device Remove
ModuleID[2] LevelID[1]: CmdOpreation[0]--set m_hDeviceRemoveEvent.
ModuleID[2] LevelID[10]: CmdOpreation[0]--WaitforEvents device remove1
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent()-DEVICE_REMOVAL_EVT, hDevCanDeleteEvent has been set
ModuleID[2] LevelID[10]: delete MxHidDevice[0124FFF8]

lulabc

使用的启动脚本是文件里面的内容是

Set wshShell = CreateObject("WScript.shell")
wshShell.run "mfgtool2.exe -c ""linux"" -l ""NAND Flash"" -s ""ddr=256"" -s ""board=nand"" -s ""boot=""  "
Set wshShell = Nothing

wker83e103

你的问题是怎么解决的？

kwcha333

好贴顶一下!

















冷氣通與一般維修公司
如何 清洗 冷氣 機的分別在於，冷氣通是一間專門針對冷氣機各類問題的維修與保養公司，無論是冷氣機發生的各種故障問題或是基本的保養服務，冷氣通都能為你解決。