请教S08FL16的编程问题

xpdhr

FL16编程问题,没办法下载,提示如下:
fl::target -lc "LC for Simple Flash"
fl::target -b 0x80 0x3c0
fl::target -v off -l off
cmdwin::fl::device -d "MC9S08FL16_FLASH" -o "16kx16x1" -a 0xc000 0xffff
cmdwin::fl::erase all
Beginning Operation ...
-------------------------
Performing target initialization ...
Device MC9S08FL16_FLASH is secured
Can't autodetect flash clock divider.
Set FCDIV register manually and use Active Debug Context for run configuration in target task.
Erasing .............
Error: Erase Command Failed. Command timeout.
Device MC9S08FL16_FLASH is secured
An invalid preference was passed to the GDI protocol plugin(HC/RS/S12Z GDI Protocol Adapter)
Error: Erase Command Failed.Command timeout.
该如何解除保护呢?在哪个界面?
我用的评估板的BDM口,不是专用BDM,在16位上很好用的,8位BDM能用吗?

阅读全文

安

不能，8位的和16位的不通用。需要用8位的BDM。

xpdhr

谢谢了