MKL25Z128系统时钟配置模块（已解决）

lifancn

 
 
 
 
 
 
 
 
 
 
void SystemCoreClockUpdate (void) {
  uint32_t MCGOUTClock;                                                        /* Variable to store output clock frequency of the MCG module */
  uint8_t Divider;
  if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x0u) {
    /* Output of FLL or PLL is selected */
    if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) {
      /* FLL is selected */
      if ((MCG->C1 & MCG_C1_IREFS_MASK) == 0x0u) {
        /* External reference clock is selected */
        MCGOUTClock = CPU_XTAL_CLK_HZ;                                       /* System oscillator drives MCG clock */
        Divider = (uint8_t)(1u C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT));
        MCGOUTClock = (MCGOUTClock / Divider);  /* Calculate the divided FLL reference clock */
        if ((MCG->C2 & MCG_C2_RANGE0_MASK) != 0x0u) {
          MCGOUTClock /= 32u;                                                  /* If high range is enabled, additional 32 divider is active */
        } /* ((MCG->C2 & MCG_C2_RANGE0_MASK) != 0x0u) */
      } else { /* (!((MCG->C1 & MCG_C1_IREFS_MASK) == 0x0u)) */
        MCGOUTClock = CPU_INT_SLOW_CLK_HZ;                                     /* The slow internal reference clock is selected */
      } /* (!((MCG->C1 & MCG_C1_IREFS_MASK) == 0x0u)) */
      /* Select correct multiplier to calculate the MCG output clock  */
      switch (MCG->C4 & (MCG_C4_DMX32_MASK | MCG_C4_DRST_DRS_MASK)) {
        case 0x0u:
          MCGOUTClock *= 640u;
          break;
        case 0x20u:
          MCGOUTClock *= 1280u;
          break;
        case 0x40u:
          MCGOUTClock *= 1920u;
          break;
        case 0x60u:
          MCGOUTClock *= 2560u;
          break;
        case 0x80u:
          MCGOUTClock *= 732u;
          break;
        case 0xA0u:
          MCGOUTClock *= 1464u;
          break;
        case 0xC0u:
          MCGOUTClock *= 2197u;
          break;
        case 0xE0u:
          MCGOUTClock *= 2929u;
          break;
        default:
          break;
      }
    } else { /* (!((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u)) */
      /* PLL is selected */
      Divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
      MCGOUTClock = (uint32_t)(CPU_XTAL_CLK_HZ / Divider);                     /* Calculate the PLL reference clock */
      Divider = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
      MCGOUTClock *= Divider;                       /* Calculate the MCG output clock */
    } /* (!((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u)) */
  } else if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x40u) {
    /* Internal reference clock is selected */
    if ((MCG->C2 & MCG_C2_IRCS_MASK) == 0x0u) {
      MCGOUTClock = CPU_INT_SLOW_CLK_HZ;                                       /* Slow internal reference clock selected */
    } else { /* (!((MCG->C2 & MCG_C2_IRCS_MASK) == 0x0u)) */
      MCGOUTClock = CPU_INT_FAST_CLK_HZ / (1 SC & MCG_SC_FCRDIV_MASK) >> MCG_SC_FCRDIV_SHIFT));  /* Fast internal reference clock selected */
    } /* (!((MCG->C2 & MCG_C2_IRCS_MASK) == 0x0u)) */
  } else if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80u) {
    /* External reference clock is selected */
    MCGOUTClock = CPU_XTAL_CLK_HZ;                                           /* System oscillator drives MCG clock */
  } else { /* (!((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80u)) */
    /* Reserved value */
    return;
  } /* (!((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80u)) */
  SystemCoreClock = (MCGOUTClock / (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT)));
}
 
 
请问各位大侠，这个函数是将系统时钟配置为了多少Mhz

我知道答案 目前已有0人回答

阅读全文

FSL_TICS_ZP

你提供的程序应该是从网上下的时钟库函数或者你买开发板时，店家提供的例子程序中的库函数吧，除了上面提供的void SystemCoreClockUpdate （）函数外，你可以试着找找有没有sys.h类似的头文件，里面会有时钟参数设置的声明。