MK60DN512ZLQ10下载程序时能下载，可是程序跑不起来。求大神解释是怎么回事？？？？

ssamd-2000987

IAR中提示是这样的！
Sun Jan 12 00:02:26 2014: Loaded macro file: D:\Program ***\IAR Systems\Embedded Workbench 6.0\arm\config\flashloader\Freescale\FlashK60Xxxx.mac
Sun Jan 12 00:02:26 2014: Windows NT detected.
Sun Jan 12 00:02:27 2014: P&E Interface detected - Flash Version 29.04
Sun Jan 12 00:02:28 2014: Device is KINETIS.
Sun Jan 12 00:02:28 2014: Mode is In-Circuit Debug.
Sun Jan 12 00:02:28 2014: CPU reset by debugger.
Sun Jan 12 00:02:28 2014:  
Sun Jan 12 00:02:28 2014: Software reset was performed
Sun Jan 12 00:02:28 2014: ----- Prepare hardware for Flashloader -----
Sun Jan 12 00:02:30 2014: 1280 bytes downloaded and verified (0.83 Kbytes/sec)
Sun Jan 12 00:02:30 2014: Loaded debugee: D:\Program ***\IAR Systems\Embedded Workbench 6.0\arm\config\flashloader\Freescale\FlashK60Xxxx.out
Sun Jan 12 00:02:30 2014: Target reset
Sun Jan 12 00:02:33 2014: Skipping flash loading pass because there is no data in the designated range: 0x10000000-0x13FFFFFF.
Sun Jan 12 00:02:33 2014: Downloaded G:\现在项目里的东西\k60 32位单片机资料\k60程序\fire_practice\build\fire_demo\Release\Exe\fire_demo.out to flash memory.
Sun Jan 12 00:02:37 2014: 6268 bytes downloaded into FLASH and verified (0.86 Kbytes/sec)
Sun Jan 12 00:02:37 2014: Loaded debugee: G:\现在项目里的东西\k60 32位单片机资料\k60程序\fire_practice\build\fire_demo\Release\Exe\fire_demo.out
Sun Jan 12 00:02:37 2014: CPU reset by debugger.
Sun Jan 12 00:02:37 2014:  
Sun Jan 12 00:02:37 2014: Software reset was performed
Sun Jan 12 00:02:38 2014: Target reset
Sun Jan 12 00:02:38 2014: There was 1 warning during the initialization of the debugging session.

阅读全文

FSL_TICS_Robin

按组合键Alt+F7弹出Options for node"demo"
在Debugger的Download选项中，选择Use flash loader(s)
再选择Override default .board file
选择FlashK60Dxxx128K.board
如图示

就叫我菜鸟吧

已经选了啊，怎么还是会出现？

blueghost98

回复第 2 楼 于2014-01-13 09:45:54发表:
按组合键Alt+F7弹出Options for node"demo"
在Debugger的Download选项中，选择Use flash loader(s)
再选择Override default .board file
选择FlashK60Dxxx128K.board
如图示
麻烦问一下这个问题还有别的解决办法吗，我也遇到这个问题没解决
 

Super Novice

楼主找个肯定能用的工程先试试呗，然后照着那工程修改配置文件。

xinyinzhou

楼主，你是不是包含中文名字啦，
我看你路径里面有中文文字啊，赶紧都换成全英文的再试下。

缄默123

我现在也遇到这个问题不知道楼主的问题解决没a

电子.呆萌

能下载的程序不一定能使用啊