imx6q5eym12ad在linux启动阶段出现段错误

luzhifei123

公司新作的工控板，imx6q5eym12ad是1.2G的SOC，在linux启动阶段会出现段错误，而imx6qimx6q5eym10ad是1.0G的SOC，用同样的uboot与linux以及文件系统能正常启动运行。

1.     3.601484] smsc95xx v1.0.4
   
2. [    3.668330] smsc95xx 1-1.1:1.0 eth1: register 'smsc95xx' at usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet, d6:2d:6b:c9:35:65
   
3. [    3.734839] caam 2100000.caam: Entropy delay = 3200
   
4. [    3.800517] caam 2100000.caam: Instantiated RNG4 SH0
   
5. [    3.861279] caam 2100000.caam: Instantiated RNG4 SH1
   
6. [    3.866277] caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
   
7. [    3.872990] caam 2100000.caam: job rings = 2, qi = 0
   
8. [    3.939122] caam algorithms registered in /proc/crypto
   
9. [    3.948322] caam_jr 2101000.jr0: registering rng-caam
   
10. [    3.954373] snvs-secvio 20cc000.caam-snvs: can't get snvs clock
    
11. [    3.960376] snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
    
12. [    3.969110] usbcore: registered new interface driver usbhid
    
13. [    3.974714] usbhid: USB HID core driver
    
14. [    3.981631] sgtl5000 0-000a: sgtl5000 revision 0x11
    
15. [    4.019003] sgtl5000 0-000a: Using internal LDO instead of VDDD
    
16. [    4.038952] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
    
17. [    4.048639] NET: Registered protocol family 26
    
18. [    4.054008] NET: Registered protocol family 10
    
19. [    4.059681] sit: IPv6 over IPv4 tunneling driver
    
20. [    4.065094] NET: Registered protocol family 17
    
21. [    4.069570] can: controller area network core (rev 20120528 abi 9)
    
22. [    4.075862] NET: Registered protocol family 29
    
23. [    4.080365] can: raw protocol (rev 20120528)
    
24. [    4.084678] can: broadcast manager protocol (rev 20120528 t)
    
25. [    4.090364] can: netlink gateway (rev 20130117) max_hops=1
    
26. [    4.096098] 8021q: 802.1Q VLAN Support v1.8
    
27. [    4.100350] Key type dns_resolver registered
    
28. [    4.107857] Unable to handle kernel paging request at virtual address ffffffc4
    
29. [    4.115086] pgd = 80004000
    
30. [    4.117798] [ffffffc4] *pgd=7f75e821, *pte=00000000, *ppte=00000000
    

复制代码

我知道答案 目前已有1人回答

阅读全文

小智MM

请问你BSP用的是哪个版本的？L4.1.15_2.0.0-ga 还是别的版本的呢？