查看: 3381|回复: 1

[分享] 恩智浦Kinetis系列【经验分享】汇总

[复制链接]
  • TA的每日心情
    开心
    2024-3-26 15:16
  • 签到天数: 266 天

    [LV.8]以坛为家I

    3301

    主题

    6548

    帖子

    0

    管理员

    Rank: 9Rank: 9Rank: 9

    积分
    32040
    最后登录
    2024-4-28
    发表于 2020-3-31 15:54:28 | 显示全部楼层 |阅读模式
    恩智浦Kinetis系列【经验分享】汇总



    哈喽,大家好,为了方便大家学习资料,今天管管将Kinetis系列的一些实战经验分享给大家,后续会不定时更新,请大家时刻关注。


    K64:
    序号标题链接
    1关于VLLSx模式下的SRAM问题https://www.nxpic.org.cn/module/forum/thread-617887-1-1.html
    2FRDM-K64F  FTM模块的输入捕获以及输出比较实验https://www.nxpic.org.cn/module/forum/thread-617879-1-1.html
    3Mcuxpresso配置FRDM-K64F的时钟 https://www.nxpic.org.cn/module/forum/thread-617854-1-1.html
    4K64 IIC地址扫描https://www.nxpic.org.cn/module/forum/thread-618607-1-1.html
    5k64的iic https://www.nxpic.org.cn/module/forum/thread-618552-1-1.html
    6使用FRDM_K64实现简单的sd卡bootloaderhttps://www.nxpic.org.cn/module/forum/thread-617682-1-1.html
    7OpenSDA不同固件调试KSDK例程https://www.nxpic.org.cn/module/forum/thread-602762-1-1.html
    8【FRDM-K64F使用笔记】+keil自带RTX系统学习开发https://www.nxpic.org.cn/module/forum/thread-602483-1-1.html
    9飞思卡尔MAPS-K64开发板程序例程  电路图信息https://www.nxpic.org.cn/module/forum/thread-613380-1-1.html
    10《K64进阶笔记》节选——DMA实现ADC扫描触发链https://www.nxpic.org.cn/module/forum/thread-609178-1-1.html
    11FRDM_K64F学习----外部中断https://www.nxpic.org.cn/module/forum/thread-605652-1-1.html
    12FRDM_K64F学习-------点亮RGB_ledhttps://www.nxpic.org.cn/module/forum/thread-605620-1-1.html
    13【FRDM-K64F使用笔记】+  FRDM K64F MBED开发学习笔记https://www.nxpic.org.cn/module/forum/thread-602662-1-1.html
    14在IAR下建立TRK-KEA64的工程例程https://www.nxpic.org.cn/module/forum/thread-603327-1-1.html
    15FRDM_K64F学习--HelloWordhttps://www.nxpic.org.cn/module/forum/thread-608851-1-1.html
    16【经验分享】frdm-k64  adc多路采集四连之第一连--基本用法https://www.nxpic.org.cn/module/forum/thread-620272-1-1.html
    17【经验分享】frdm-k64  adc多路采集四连之第二连--简易多路采集https://www.nxpic.org.cn/module/forum/thread-620273-1-1.html
    18【经验分享】frdm-k64  adc多路采集四连之第三连--灵活多路采集https://www.nxpic.org.cn/module/forum/thread-620274-1-1.html
    19【经验分享】frdm-k64  adc多路采集四连之第四连--一个问题分析https://www.nxpic.org.cn/module/forum/thread-620275-1-1.html

    KL25:
    序号标题链接
    1 Kinetis  KL25 USB例程指南https://www.nxpic.org.cn/module/forum/thread-582286-1-1.html
    2基于 KL25Z  的红外编码破解https://www.nxpic.org.cn/module/forum/thread-584298-1-1.html
    3使用KL25-SC中快捷工具创建新工程https://www.nxpic.org.cn/module/forum/thread-580331-1-1.html
    4Kinetis KL25  UART例程2https://www.nxpic.org.cn/module/forum/thread-567392-1-1.html
    5Kinetis KL25  BME例程1https://www.nxpic.org.cn/module/forum/thread-566162-1-1.html
    6Kinetis KL25  BME例程2https://www.nxpic.org.cn/module/forum/thread-568125-1-1.html
    7Kinetis KL25  低功耗模式下TPM模块输出PWM波https://www.nxpic.org.cn/module/forum/thread-563964-1-1.html
    8Kinetis KL25  TPM模块输入捕获和输出PWM波 https://www.nxpic.org.cn/module/forum/thread-563962-1-1.html
    9KL25  加速度传感器PE例程 https://www.nxpic.org.cn/module/forum/thread-563356-1-1.html
    10KL25 ADC  ping-pong模式的实现例程https://www.nxpic.org.cn/module/forum/thread-561971-1-1.html
    11Kinetis KL25  低功耗模式(上,中,下)https://www.nxpic.org.cn/module/forum/thread-555664-1-1.html
    12KL25  16位单端ADC最高转换频率下代码效率测试及被采波形复现https://www.nxpic.org.cn/module/forum/thread-591331-1-1.html
    13基于Fresscale  KL25Z的多功能MP3https://www.nxpic.org.cn/module/forum/thread-600884-1-1.html
    14KL25触感例程结合FreeMaster软件https://www.nxpic.org.cn/module/forum/thread-569427-1-1.html
    15【智能生活-KL25Z】MMA8451加速度采集显示https://www.nxpic.org.cn/module/forum/thread-605891-1-1.html
    16KL25超声波测距踩坑https://www.nxpic.org.cn/module/forum/thread-620508-1-1.html

    KL126:
    序号标题链接
    1【YL-KL26Z开发】+ IIC读写24C02https://www.nxpic.org.cn/module/forum/thread-600294-1-1.html
    2关于KL16Z的IIC速度的问题https://www.nxpic.org.cn/module/forum/thread-617856-1-1.html
    3【YL-KL26Z开发】+  SPI驱动OLEDhttps://www.nxpic.org.cn/module/forum/thread-600349-1-1.html
    4YL-KL26Z开发笔记+视频讲解】KL26多种SPI工作模式分享https://www.nxpic.org.cn/module/forum/thread-599942-1-1.html
    5关于MCUXpresso下配置KL26Z的uart0https://www.nxpic.org.cn/module/forum/thread-620405-1-1.html

    KL127:
    序号标题链接
    1KL27使用UART  IDLE自动识别接收帧长度https://www.nxpic.org.cn/module/forum/thread-610649-1-1.html
    2【KL27 mini  Board 开发】+按键https://www.nxpic.org.cn/module/forum/thread-604409-1-1.html
    3KL27上的SpiFlash模拟U盘实现https://www.nxpic.org.cn/module/forum/thread-611879-1-1.html
    4【KL27 mini  Board开发】+ KL27 mini Board 实现LCD511显示https://www.nxpic.org.cn/module/forum/thread-604173-1-1.html
    5【KL27 mini  Board开发】+ MDK调试成功:例程1-LEDhttps://www.nxpic.org.cn/module/forum/thread-604256-1-1.html


    KEA128:
    序号标题链接
    1[TRK-KEA128开发笔记]移植FreeRTOS到KEA128https://www.nxpic.org.cn/module/forum/thread-604919-1-1.html
    2[TRK-KEA128]LIN通讯实验https://www.nxpic.org.cn/module/forum/thread-603169-1-1.html
    3[TRK-KEA128]KEA系列CAN通讯https://www.nxpic.org.cn/module/forum/thread-603319-1-1.html
    4[TRK-KEA128开发笔记]KEA8  ADC采集https://www.nxpic.org.cn/module/forum/thread-602450-1-1.html
    5[TRK-KEA128开发笔记]串口UART及PIT中断程序https://www.nxpic.org.cn/module/forum/thread-602429-1-1.html
    6KEA128 IRQ例程分享https://www.nxpic.org.cn/module/forum/thread-610710-1-1.html
    7[TRK-KEA128开发笔记]KEA128  硬件CRC校验https://www.nxpic.org.cn/module/forum/thread-605043-1-1.html
    8基于KBOOT  的KEA128 UART bootloaderhttps://www.nxpic.org.cn/module/forum/thread-609766-1-1.html
    9[TRK-KEA128  开发笔记]KEA128 LIN 总线状态机实现https://www.nxpic.org.cn/module/forum/thread-603502-1-1.html
    10官方KEA EEPROM  emulation 驱动IAR工程补丁https://www.nxpic.org.cn/module/forum/thread-612549-1-1.html
    11【TRK-KEA8开发笔记】-UART的使用https://www.nxpic.org.cn/module/forum/thread-602519-1-1.html
    12KEA128  template工程分享https://www.nxpic.org.cn/module/forum/thread-601922-1-1.html
    13KEA128+SHT30使用方法+CRC校验 https://www.nxpic.org.cn/module/forum/thread-620198-1-1.html
    14KEA128的CAN收发程序https://www.nxpic.org.cn/module/forum/thread-619467-1-1.html
    KW36:
    1KW36的beacon讲解https://www.nxpic.org.cn/module/forum/thread-620883-1-1.html
    2KW36入门学习(一、IAR环境搭建)https://www.nxpic.org.cn/module/forum/thread-620052-1-1.html
    3KW36入门学习(二、运行heart_rate_sensor工程)https://www.nxpic.org.cn/module/forum/thread-620053-1-1.html
    4KW36入门学习(三、Universal Multilink使用)https://www.nxpic.org.cn/module/forum/thread-620054-1-1.html
    5KW36入门学习(四、创建source  insight工程并梳理工程结构)https://www.nxpic.org.cn/module/forum/thread-620055-1-1.html
    6KW36入门学习(五、修改广播功率)https://www.nxpic.org.cn/module/forum/thread-620063-1-1.html
    7KW36入门学习(六、开机后自动广播)https://www.nxpic.org.cn/module/forum/thread-620064-1-1.html
    8在KW36上用LIN总线进行固件升级https://www.nxpic.org.cn/module/forum/thread-620127-1-1.html
    其他:
    序号标题链接
    1TWRKV58F220M  MCG模块介绍,多图预警https://www.nxpic.org.cn/module/forum/thread-617801-1-1.html
    2SDK代码工程相近芯片移植https://www.nxpic.org.cn/module/forum/thread-616517-1-1.html
    3VS2019编译blhost工程出错https://www.nxpic.org.cn/module/forum/thread-618617-1-1.html
    4使用P&E  recovery utility 工具拯救FRDM板https://www.nxpic.org.cn/module/forum/thread-612481-1-1.html
    5使用P&E  Cyclone Max 烧写Kinetis芯片步骤https://www.nxpic.org.cn/module/forum/thread-610500-1-1.html
    6当OpenSDA遭遇WIN10https://www.nxpic.org.cn/module/forum/thread-605393-1-1.html
    7 KEA低功耗验证https://www.nxpic.org.cn/module/forum/thread-611689-1-1.html
    8JLINK  Commander 自动解锁问题解决https://www.nxpic.org.cn/module/forum/thread-615986-1-1.html
    9Kinetis  K系列WDOG中断检测https://www.nxpic.org.cn/module/forum/thread-613268-1-1.html
    10OTP  Driver函数调用解析https://www.nxpic.org.cn/module/forum/thread-612507-1-1.html
    11脉冲宽度调制器(PWM)应用https://www.nxpic.org.cn/module/forum/thread-611582-1-1.html
    12指定数据存储于特定外部RAM区域https://www.nxpic.org.cn/module/forum/thread-611531-1-1.html
    13KL系列LIN从机的简单使用https://www.nxpic.org.cn/module/forum/thread-611187-1-1.html
    14KBOOT中的backdoor key做app更新 https://www.nxpic.org.cn/module/forum/thread-614844-1-1.html
    15在MCUXpresso上创建K10的工程https://www.nxpic.org.cn/module/forum/thread-620458-1-1.html
    16spi用法三连之两种基本用法https://www.nxpic.org.cn/module/forum/thread-620565-1-1.html
    17spi用法三连之w25q32读写https://www.nxpic.org.cn/module/forum/thread-620566-1-1.html
    18spi用法三连之SFUD移植 https://www.nxpic.org.cn/module/forum/thread-620567-1-1.html
    19usb调用讲解https://www.nxpic.org.cn/module/forum/thread-620569-1-1.html
    20自行编译mcu调试固件 https://www.nxpic.org.cn/module/forum/thread-620725-1-1.html
    21http_client https://www.nxpic.org.cn/module/forum/thread-620786-1-1.html
    22自制cgi网页控制led https://www.nxpic.org.cn/module/forum/thread-620788-1-1.html
    23SD卡作U盘的bootloaderhttps://www.nxpic.org.cn/module/forum/thread-620831-1-1.html
    24mqtt上传数据https://www.nxpic.org.cn/module/forum/thread-620882-1-1.html
    25ble一些基础知识https://www.nxpic.org.cn/module/forum/thread-620884-1-1.html
    26自制ble服务https://www.nxpic.org.cn/module/forum/thread-620886-1-1.html
    27mcuxpresso在指定地址放置配置数据https://www.nxpic.org.cn/module/forum/thread-620018-1-1.html
    28Winbond  W25Q128闪存的驱动程序和命令行Shellhttps://www.nxpic.org.cn/module/forum/thread-619453-1-1.html


    1K60使用IAR烧录教程https://www.nxpic.org.cn/module/forum/thread-620153-1-1.html
    2基于KE16 的小家电Touch触摸面板方案https://www.nxpic.org.cn/module/forum/thread-620743-1-1.html
    3【经验分享】Kv31的pflash例程报错解决https://www.nxpic.org.cn/module/forum/thread-619997-1-1.html
    持续更新中>>





    签到签到
    回复

    使用道具 举报

  • TA的每日心情
    开心
    2020-12-8 12:09
  • 签到天数: 1 天

    [LV.1]初来乍到

    0

    主题

    7

    帖子

    0

    新手上路

    Rank: 1

    积分
    32
    最后登录
    2020-12-8
    发表于 2020-12-8 10:49:17 | 显示全部楼层
    thanks for sharing
    地方
    回复 支持 反对

    使用道具 举报

    您需要登录后才可以回帖 注册/登录

    本版积分规则

    关闭

    站长推荐上一条 /4 下一条

    Archiver|手机版|小黑屋|恩智浦技术社区

    GMT+8, 2024-4-29 04:53 , Processed in 0.111376 second(s), 19 queries , MemCache On.

    Powered by Discuz! X3.4

    Copyright © 2001-2024, Tencent Cloud.

    快速回复 返回顶部 返回列表